[Technical indicators] Appearance: white beady
Value
Ionic and non-ionic
Solubility Easily soluble in hot water
Stability is not sensitive to electrolytes, stable to weak acids
[Main Ingredients]
Derivatives of amino fatty acids
[Product Features]
The product has a very soft feel and good antistatic properties.
Fully improve the pile properties of fabrics.
It has extremely low yellowing characteristics and can be especially used on bleached fabrics. Even if the heat setting temperature is as high as ℃, cotton fabrics will rarely yellow when bleached.
Easy to dissolve, easily soluble in hot water, and the emulsion is stable.
High mechanical properties of fabrics and yarns can reduce the friction coefficient between fiber and metal.
[Scope of application]
Softener for various types of fibers
[Application process]
Soft beads are cationic/nonionic products that have affinity for fibers, so they can be used to absorb Law. The absorption rate is the highest when ~, and can also be used for padding or dipping/squeezing methods. The bath solution should be continuously replenished.
Solution/Dilution
Soft beads can be dissolved in parts of water to make a solution. Add the required amount of soft beads to ~℃ hot water and stir for about an hour until completely dissolved. In order to prevent a film from forming on the surface of the solution, stir continuously until it cools to room temperature. The viscosity of high-concentration solutions is relatively high, and the stability of the stock solution is very good. It can be diluted with any proportion of water, but the water should be weakly acidic to neutral. Alkaline ion exchange water should be adjusted with acetic acid first.
If the soft beads are diluted under high shear conditions, it is recommended to add a small amount of defoaming agent to avoid excessive foaming. The temperature should not exceed ℃, otherwise the emulsion will be very viscous and difficult to stir. Finally, it should be filtered to remove insoluble substances. .
Amount
The amount of soft beads should be determined according to the type of fiber, the structure of the fabric and the required feel. It is generally recommended that too much solution of (~ will damage the feel of synthetic fibers.
Process
Value~
Liquor ratio~
Time~
Temperature~
Dehydration and drying without washing
Absorption method
Cotton soft beads
Viscose soft beads
Wool soft beads
Nylon soft beads
Polyester soft beads
Acrylic soft beads
Note that it is not recommended for alkali containing sodium sulfate In the dyeing bath of sex dyes. When anionic products are present, their compatibility with soft beads should be tested in the laboratory first.
Padding
Various types of fiber soft beads
For cationic soft beads It is impossible to eliminate the color change at the beginning and end of the bath solution in the padding method.
[Packaging and storage]
Bagged
Store in a cool, dry and ventilated place, in a sealed container Stable for years. This product is sensitive to the following and above
Xiamen factory direct sales: soft beads HGF 15 yuan/kg